In the process of raising chickens, many farmers are not aware of the importance of ventilation, and it is considered that feeding and temperature and humidity management are more important. However, if the chicken house does not reach reasonable ventilation, some harmful gases in the house will not be discharged, and fresh air will not enter, which will cause some diseases in the flock. Fans are common chicken ventilation equipment used by farmers. If the farmers use them improperly, the effect will be unsatisfactory. So the following author will talk about the details of using the fan of the poultry farming equipment.

1. Use fan equipment for ventilation, farmers must pay attention to the tightness of the house, the better the house is sealed, the better the ventilation effect. However, to leave a few small windows, the minimum opening distance of the fan ventilation window is: 2.5-75px.

2. When the farmer purchases the fan equipment, the number of required fans should be calculated according to the area of the house. Pay attention to the size and quantity of the house to avoid excessive negative pressure, resulting in lack of oxygen in the house.

3. If the farmer adopts longitudinal ventilation, it should be noted that when the wind speed is very low, it is necessary to check whether there is any air leakage. Is the belt of the fan loose, the curtain is dirty or clogged, and the number of fans is appropriate.

4. For the number of opening of small windows, the farmers should determine according to the temperature inside the house and the number of fans. If it is more than two, when the side fan is running for a long time, it is necessary to consider all the small windows. If it is lower than two fans, you should consider closing half of the small window.

5. Many farmers have a common misunderstanding. The higher the wind speed, the better the ventilation effect will be. In fact, the higher the wind speed, the better. Generally, the longitudinal ventilation speed in summer is no more than 2.5 m/s. Scientific research has shown that the wind-cooling effect is no longer enhanced even if the wind speed exceeds 3 meters and the wind speed is increased.

6. Farmers should also pay attention to the fact that chicks are more aware of the wind speed when ventilating the chicks. Therefore, farmers should remember that at the same temperature and wind speed, chicks have twice the somatosensory temperature than adult chickens.

The above six points are some details of the attention of the farmers in the process of using the fan equipment for breeding laying hen poultry equipment. I hope that the above description can help the farmers. In addition, farmers should pay attention to the fact that the fan equipment should be regularly maintained and maintained, which can extend and maintain the service life and efficiency of the equipment.

With the intensification of the chicken industry and the increasing popularity and development of large-scale farming, the use of chicken farming equipment to raise chickens has become an important means for farmers to move toward large-scale development. The use of chicken equipment to raise chickens not only contributes to the chicken farms' adaptation to the changing times, but also helps farmers to increase their benefits. In order to better use chicken equipment to regulate chickens, farmers must learn some standardized management points.

1. Reasonable division of the chicken house area: Now the chicken is no longer raised or raised in the same way as before. There is no regional distinction in the chicken house. The equipment raises chickens. The farmers should make a reasonable division of the whole house, and the installation functions are arranged. Office and living areas, production areas, as well as sewage treatment areas such as manure, etc., the boundaries between the areas should be clear, when the personnel carry out the production area should pay attention to hygiene, equipped with overalls, work shoes.

2. Equipped with reasonable chicken equipment: When selecting chicken raising equipment, farmers should equip with reasonable chicken raising equipment according to the size of their own chicken house, the number of chickens raised, and the actual requirements. It is recommended that the necessary chicken raising equipment for the farmers: automatic drinking fountains, feeding machines, decontamination machines, and users of conditional breeding laying hens can also be equipped with pick up the egg machine. In addition, equipment such as fan wet curtains that manage the environment of the chicken house is also required for farmers to purchase.

3. Strengthen the management of personnel: Farmers should formulate a series of management points in accordance with the charter. Different personnel should manage different areas and should not be confused. The staff usually pay attention to observe the health status of the poultry and maintain the environmental sanitation inside and outside the house. Regularly clean and disinfect the surrounding environment, inside and outside the house, utensils, equipment, etc., and at the same time do a good job in killing rats, killing mosquitoes, preventing wild beasts and wild birds.

4. Improve the rules and regulations: Formulate the post management system for grassroots organizations, technicians, and breeders. Develop a system for the use of inputs such as feed and veterinary drugs. Formulate management systems for sanitation, epidemic prevention and disinfection. In normal management, we will follow the rules, strengthen the assessment, and implement it in accordance with the system.

5. Pay attention to the usual record: the farmers should make relevant records for the feeding management of the chickens in the usual feeding management. Including the environment of the house, the use of the feed, the use of the drug, the time and method of disinfection of the chicken cage equipment, the effect, the time and method of immunization, and the effect. There is also the health status of the usual flocks, and the farmers must make corresponding records.

The above is some of the key points of standardized management of chicken farms. It is only for farmers to refer to. Specifically, it is necessary to formulate reasonable battery cage systems and management according to the actual situation of the farmers themselves. Thank you for your attention!

In the process of raising chickens using poultry farming equipment, the work of giving the chickens a job is what every farmer has to do. There are many types of drugs, such as immune drugs, disinfectants, drugs for treating diseases, and so on. In particular, the use of automated poultry farming equipment to raise chickens, the density of breeding, so we must pay more attention to the prevention of disease, do a good job of immunization and disinfection. In the process of using the medicine, the farmers must also master certain skills to make the medicine play a better effect. The authors here will tell the farmers about several techniques for raising chicken medicine.

1. General immunization drugs and disinfecting drugs need to be equipped with water before they can be used. Other drugs should be mixed in the feed. Therefore, when the farmer allocates water or ingredients to the medicine, he should master the water or feed amount of the medicine, so that it can be served within 2 hours. When mixing the medicine, the medicine and the material should be uniform; when the medicine is injected, the dosage of the chickens of different ages is not the same, the chicken does not exceed 0.2 ml, the young chicken does not exceed 0.5 ml, and the adult chicken should not exceed 1.5 ml.

2. Antibiotics are drugs for the prevention and treatment of diseases. Most of the farmers nowadays are large-scale chicken farms. Once the flocks are bred, the use of antibiotics is a reasonable balance between controlling the cost of breeding and reducing the problem of antibiotic residues. When using antibiotics, farmers can double their use when they use antibiotics for the first time. In addition, farmers should pay attention to the use of antibiotics to treat diseases, you can choose 3-4 different drugs to use, to avoid the emergence of drug resistance and expand the scope of sterilization. However, if antibiotics are used for prophylaxis, only one drug can be used.

3. When treating diseases, farmers should pay attention not to change drugs frequently. If a drug is used for 2-3 days without any effect, farmers can consider choosing a new treatment plan.

4. When using antibiotics, farmers should pay special attention to the fact that each antibiotic cannot be used alone for a long time, otherwise it will easily produce resistant strains.

5. Farmers should pay attention to the fact that if the egg broiler is infected by the germ, the resistance of the flock will be greatly reduced, so there will be different degrees of secondary virus infection. Therefore, an antiviral drug can be added while using an antibacterial agent.

6. At the same time as treatment, eliminate the adverse factors that cause the disease. Such as excessive stocking density, temperature, humidity is too high or too low, the air is not good and other undesirable factors.

7. Regular disinfection is an effective means of killing pathogenic microorganisms in chicken houses, so regular disinfection is a must for farmers. In the disinfection work, when spraying disinfectant or disinfecting with chicken, it is easy to induce respiratory diseases. Therefore, laying hens and broilers should be given drugs to prevent respiratory diseases.

The above seven points are introduced by the authors for farmers. In the process of using poultry battery cages to raise chickens, some techniques and points when using various types of medicines are provided for farmers to learn and refer to. It is hoped that farmers can better use the drugs in the future feeding process to allow the chickens to grow healthily.

Chicken feeders are also known as automatic chicken feeders, as well as automatic feeders. Its function is to feed the chicken house using the chicken cage to feed the chicken, use the feeding machine to feed the chicken, save time and effort, and evenly feed, which is convenient for the management of the farmers. So what is the composition of the feeder? The author will introduce the farmers.

Feeding machine: It consists of a rack, a traveling power output system, a traveling system, a material quantity adjustment system for the power supply system, and a power distribution system.

1. The frame is welded by high-quality rectangular steel with reasonable structure, large bearing capacity and no deformation.

2. The traveling power system is driven by the motor of the advanced cycloidal pinwheel reducer, and the drive is lossless. The failure rate is low, the life is long, and the operation is stable, the noise is small, and the egg production rate can be improved.

3. The walking system adopts chain and sprocket transmission. The anti-vibration effect is good, corrosion-resistant, and the guide rail is laid with square steel, which makes the walking stable, increases the contact area, prevents slipping, and saves electric energy.

4. The feeding system adopts the core technology design and is equipped with a refiner to ensure uniform feeding.

5. The power distribution system adopts the limit switch and stops automatically when the travel ends. Various electrical control systems can also be designed according to the needs of users.

6. The lifting system consists of a flat conveyor and a vertical conveyor. The system controls the cutting by photoelectric switch, which is accurate and economical and improves the working efficiency.

The above is the composition of the chicken feeding machine introduced by the author, as well as the introduction of each component system.

Chicken cage manufacturers believe that in the use of chicken cages to raise chickens, breeding by strong and weak groups can improve the uniformity and survival rate of the flock. If you want to make the flocks basically the same, high-quality poultry farming equipment is indispensable. However, the cost of raising chickens using poultry farming equipment is relatively high. The authors will tell you why the cost of using chicken cages to raise chickens in India is so high.

1. Poultry feeding equipment adopts a multi-layer cage method, that is to say, the method of using chicken cage culture does not refer to a layer of chicken cage. The multi-layered three-dimensional culture used in the current chicken cage farming has three layers, four layers or even more layers. Therefore, using chicken cage culture, it can breed three or four times more than other flat feeding methods, and even a larger number of laying hens and broilers. Moreover, the area utilization rate of the chicken house has been increased, and the number has increased. The income of the farmers will naturally increase much more than before.

2. Since it is a multi-layered chicken cage, it must be carried out from the ground. The area above the chicken house is also used, and the broiler in the cage will fall off the ground or conveyor belt after it has produced feces. Above the clearing dung belt, the chickens do not directly contact the feces, which reduces the diseases caused by fecal infections, naturally improves the quality of the egg broiler chickens and the cost of treating the disease, so that the chickens grow stronger and the time for the outbreak is greatly advanced, and the benefits are increased.

3. There is also the use of chicken cages to raise laying hens and broilers. Laying hens and broilers have lived in chicken cages for a long time. The breeding density is relatively large, so there is little space for chicken activities. When the broiler activity is small, the energy consumption will be reduced, the required feed will be reduced, and the cage can effectively save the feed cost by more than 20%.

4. In addition, the farmer will put the laying hens and broilers in the chicken cage equipment for breeding, drinking water, feeding and other aspects will be more convenient. Farmers can save a lot of time to manage the flocks and other things, and improve the labor efficiency of the farmers.

5. The key point is the quality of the chicken cage equipment. The chicken cage equipment can not be reused once the chicken is cultured. The chicken cage equipment produced by the general poultry equipment manufacturer can be used for more than ten years. If it is a hot-dip galvanizing process, corrosion-resistant, anti-aging chicken cages, which have a service life of 15-20 years, can breed countless batches of chickens for farmers. Therefore, when farmers calculate the cost of chicken cages, they should be averaged. It will be found that the use of chicken cages is more effective than other farming methods.

Nowadays, the breeding model has been developing into automated poultry farming, and the most indispensable part of the process of automated poultry farming is chicken cages. Chicken cogs can promote the healthy growth and production performance of flocks. The main chicken coops introduced by poultry equipment manufacturers are layer chicken cages, broiler cages and brooding cages. In order to allow farmers to fully understand these cages, the authors will detail the role of such cages for farmers.

Layer chicken cage: The most important thing in laying hens is to improve the performance of laying hens and reduce the breakage rate of eggs. When laying hens to raise chickens, the activity of the flocks will be greatly reduced, so that the conversion rate of the chicken feed will increase, the conversion rate of the chicken feed will increase, and the production performance of the hens will also increase. Moreover, the angle design of the layer cage and the bottom net sliding egg is reasonable, which will greatly reduce the breakage rate of the egg, thereby improving the economic benefit of the farmer in the later stage.

Broiler cages: The most important thing in broiler farming is to increase the growth rate of broilers and shorten their breeding period so that their body weight can be increased. The use of broiler cages can limit the amount of activity in broilers, so that the activity of the flocks reduces the feed conversion rate and the rate of weight gain increases. Moreover, the design of the broiler cage bottom net is flexible and dense, so that the occurrence of chest bursitis and chicken leg disease in the flock can be avoided, and the quality of the broiler can be improved.

Brooding cages: The breeding of chicks is the most important stage in the whole breeding process, and the chicks are relatively small in size and sensitive to external changes. The brooding cage is used, and the cage distance is encrypted, so that the chicks can be prevented from escaping. Moreover, the brooding cage can reasonably distribute the breeding density of the chicks and create a good living environment for the chicks.

The above is for the farmers to tell the different cages to help the farmers, I hope that through today's introduction, farmers can have a more comprehensive and in-depth understanding of the cages they use.

In the process of using chicken battery cages to breed laying hens, many farmers will choose to use the method of drinking water immunity to carry out immunization work of chickens. Immunization is an effective means to prevent diseases now, and drinking water immunization is a simple, quick and convenient method. The method, so many farmers will use, but drinking water immunization also needs to pay attention to the correct way to ensure the role. The following authors will tell farmers about the correct way to immunize with water.

1. Use high-efficiency and attenuated vaccines: When selecting vaccines, farmers must pay attention to the quality of vaccines and select attenuated vaccines from colleges and universities, select regular manufacturers to buy, and farmers should observe the validity period and traits of the vaccine before drinking water immunization. Changes, do not use vaccines that are defective, expired, and improperly stored.

2. Preparation before immunization: Before drinking water immunization, the farmers should pay attention to the water system and the drinking utensils. However, it should be noted that disinfectants cannot be used for disinfection and cleaning. It is advisable to use water, porcelain and plastic utensils.

3. Selection of immune water: The time of selection of immune water is recommended. The farmer chooses to use distilled water, cold water or clean deep well water to dilute. If tap water is selected, the farmer should use it after boiling and then use it overnight.

4. Dilution of the vaccine: After the vaccine is poured into the water, it should be evenly mixed with a clean wooden stick. It should be carried out indoors. If there is no wind outside, it can be selected for outdoor use. You can add 0.2- to the diluent. 0.5% skim milk powder or sorbitol protects the vaccine.

5. Stop water before immunization: In order to ensure that the chickens can drink the immune water, the farmers should not drink water for the chickens for 3-6 hours before the drinking water is immunized. The length of the water stop of the farmers can be based on the temperature of the house. Choose the wet and dryness of the feed. Before drinking water, it is necessary to increase the number of drinking fountains according to the number of chickens and the age of the chickens, so that more than 90% of the chickens can drink the vaccine at the same time. When the number of chickens is large and the drinker is lacking, it can be carried out in batches to prevent the vaccine from being placed too long to cause the vaccine to fail.

The above is the author's consultation with poultry farming equipment suppliers, in the process of using chicken cages to raise chickens, the farmers use the drinking water immunization method to vaccinate, the correct way to carry out drinking water immunization. In addition, there are many ways to immunize chickens. Farmers should choose a reasonable method to immunize according to immune diseases, and do not rely solely on drinking water for immunization.

Before the farmers purchase the broiler battery cages and let the equipment enter the house, the farmers must check all parts of the house. Careful inspection can ensure a good start for the farming work and avoid various problems in the chicken raising process. Before the authors share the farming broiler, it is necessary to check six aspects of the house. So that farmers can use it for reference.

1. Disinfection: Froze the chicken house for 24 to 48 hours a week in advance. Disinfect 2-3 days of spray disinfection, disinfectant should choose products that are not corrosive to metal.

2. Check the chicken battery cage: Make sure that each kennel is free to switch, ensuring that each cage bottom and the four walls are closed with a bottom net.

3. Test temperature: Check whether the boiler, radiator, thermostat computer and aqueduct are intact, and place the temperature probe on the horizontal line of the two-layer chicken cage. Then close the sunroof and all the vents and adjust the temperature. Observe how long it takes for the room temperature to reach 30 degrees.

4. Check the light: The light is required to be soft and bright, and it can be reached everywhere, without dark corners.

5. Check the power line: Each electrical circuit must be carefully inspected to prevent leakage of the connection, and the consequences of the leakage of the metal in the cage are unimaginable.

6. Check the waterline: Make sure that the pipeline is not leaking, seepage proof, and that each nipple is intact and the water supply is guaranteed.

The above is the six points shared by the author about the inspection before using the broiler cage to raise chickens. In addition, the authors suggest that farmers should pay attention to the maintenance of equipment and disinfection in the process of using broiler cages, so that they can better work for the farmers and increase the service life of the equipment.