Water is the source of life. Without water, no creature can survive normally. Especially when we are doing breeding, chickens need a lot of water to ensure that there is enough water in the body. If the chicken lacks water, it will cause a series of problems. Not only that, the quality of water is also the root of the health of the flock. If the quality of the water used by the chickens every day is poor, it will lead to   chicken is sick. In the normal operation of chicken raising equipment, in order to avoid these undesirable phenomena, scientific methods must be used to add water to the chickens and clean the chicken drinking equipment. Cleaning the drinking fountains of chicken farming equipment is also one of the things we must do. Today, the editor will introduce how to clean it.

　　 1. Many people find it troublesome to clean the chicken water dispenser, so it usually takes a long time to install and use, and the water dispenser is blocked and used abnormally if it is not cleaned. This is incorrect behavior.

　　2. In the drinking fountain of the chicken breeding equipment, the discharged water is left in the pipeline, and there are several drinking openings in the sewage pipe section.

　　3. The water stays in the drain pipe to prevent the water from going bad and polluting the drinking water system.

　　4. For drinking water or flushing water, pipes and water tanks should be used to prevent vacuum from accumulating in the drinking water system, causing precipitation, deterioration and water pollution.

　　5. In production practice, if there are foreign objects in the drinking fountain of the chicken breeding equipment, you can open the end of the pipe so that there is a pressure pipe with fast water flow at the other end of the high-pressure water pipe, and flush the nipple with high-pressure fast water to make the drinking pipe sticky and deteriorate. Remove foreign matter and sediment in the high-pressure water pipe. If there is a biofilm on the short section of the water pipe, hydrogen peroxide can be used to remove the biofilm.

　　6. ​​This method is often used to flush the pipes of chicken breeding equipment, which can prevent the formation of sticky and deteriorated foreign matter and the deposition of foreign matter in the water, thereby ensuring the cleanliness of drinking water.

　　After cleaning the chicken raising equipment, we must clean up all the remaining feed on the feeding line, especially the feed left in the trough, the corner of the conveyor chain and the hopper. When cleaning, use a vacuum cleaner, blower, iron brush, etc. In addition, under the feeding chain, insert sawdust with an abrasive tool to run the chain and remove the fixed feeding residue.