In the battery layer cages mode, the density of the flock is large, and the facilities are strict. The equipment maintenance should be highly valued to avoid accidents. It is recommended to pay attention to the following issues when using cascading laying hen cage equipment:

1. Power assurance system

In addition to the conventional power system, generators that match the chicken farm must be required and can be switched automatically.

2. Lighting

Ensure that the lighting in the house is uniform, and the lamp can be installed in a wrong layer or the row lamp can be used.

3. Feeding system

The transfer and feeding process does not require any manual operation and the entire process is fully automated. The basic working process is as follows:

The feed tanker feeds the feed to the feed storage tower outside the chicken house on time, and then the lateral feed device feeds the feed in the feed tower to the feed hopper of each column at a set time. After the last driving hopper is filled with feed, the lateral conveying device automatically stops feeding. The feeding carriage runs backwards according to the set time, and when it runs to the end of each column of cages, the driving automatically stops. During the operation, the hopper of each layer of the train corresponds to one trough, which can evenly feed the feed in the trough, and each chicken can freely feed fresh feed.
 
After the flock feeds the feed of the trough (set a certain time), the feeding train automatically runs to the front end of the cage, and then automatically stops at the head frame position. During the operation, the vehicle again landed the feed evenly in the trough, and the process completed a feeding procedure. The number of 1d feeds is based on the craft of each farm.